North America - Volume III - Control Devices

Home Table of Contents NOTE: [ Definitions and Abbreviations ]
Series Device, Form, Nominal Resistive Load Page No.

V310
P510
V610
V210
V710
CS400
CS500
V110
F410
CSHM
CSHPB
CSHP
VS400

TD-1436
TDH-6060/6061
TDH-8060/8061
TDH-7060/7061

TDH-1609
TD-1435
TDH-6050/6051
TDH-8050/8051
TDH-7050/7051

T531

TDH-8080/8081

TDH-1610
TDH-6070/6071
TDH-8070/8071
TDH-7070/7071

FLSH402

TD-1412
 		SENSOR, AC OVERVOLTAGE, 2PDT OR 4PDT, 10A@28VDC
SENSOR, AC PHASE SEQUENCE, 2PDT OR 4PDT, 10A@28VDC
SENSOR, AC POWER MONITOR, 2PDT OR 4PDT, 10A@28VDC
SENSOR, AC UNDER VOLTAGE, 2PDT OR 4PDT, 10A@28VDC
SENSOR, AC VOLTAGE, 2PDT, 3PDT OR 4PDT, 10A@28VDC
SENSOR, CURRENT, 2PDT, 2A@28VDC
SENSOR, CURRENT, 2PDT, 2A@28VDC
SENSOR, DC VOLTAGE, 2PDT OR 4PDT, 10A@28VDC
SENSOR, FREQUENCY, 2PDT OR 4PDT, 10A@28VDC
SENSOR, HALL EFFECT FOR CURRENT MEASUREMENT
SENSOR, HALL EFFECT FOR BATTERY BUS DIRECT AND RETURN PROTECTION
SENSOR, HALL EFFECT FOR RCCB OPERATION
SENSOR, UNDERVOLTAGE, 2PDT, 2A@28VDC

TIME DELAY ON OPERATE ADJ, 1PST, 0.25A@28VDC
TIME DELAY ON OPERATE ADJ, 2PDT, 10A@28VDC
TIME DELAY ON OPERATE ADJ, 2PDT, 10A@28VDC
TIME DELAY ON OPERATE ADJI 4PDT, 10A@28VDC

TIME DELAY ON OPERATE FIXED, 1PNO(SSO), 0.15A@28VDC
TIME DELAY ON OPERATE FIXED, 1PST, 0.25A@28VDC
TIME DELAY ON OPERATE FIXED, 2PDT, 10A@28VDC
TIME DELAY ON OPERATE FIXED, 2PDT, 10A@28VDC
TIME DELAY ON OPERATE FIXED, 4PDT, 10A@28VDC

TIME DELAY ON OPERATE/RELEASE, FIXED/ADJ, 3PDT, 25A@28VDC

TIME DELAY ON RELEASE ADJ, 2PDT, 10A@28VDC

TIME DELAY ON RELEASE FIXED, 1PNO(SSO), 0.15A@28VDC
TIME DELAY ON RELEASE FIXED, 2PDT, 10A@28VDC
TIME DELAY ON RELEASE FIXED, 2PDT, 10A@28VDC
TIME DELAY ON RELEASE FIXED, 4PDT, 10A@28VDC

TIME DELAY PROGRAMMABLE TIME/FUNCTION, 2PST(SSO), 0.25A@28VDC

TIME DELAY REPEAT CYCLE TIMER, 1PST, 0.25A@28VDC
 		1
4
7
10
13
16
19
22
25
28
30
33
36

39
42
45
48

51
54
57
60
63

66

70

73
76
79
82

85

89

Disclaimer: Although great care has been taken by the publisher in compiling and checking this information to insure that it is current and accurate, the Publisher disclaims any and all liability from error, ommissions, or inaccuracies whether attributable to inadvertence or otherwise, and from any consequences arising therefrom.

NOTE: In support of the RoHS Directive and in alignment with MIL relay specification prohibition of the use of Cadmium plating. Esterline Power Systems in the process of transitioning to non-Cadmium plated corrosion resistant hardware. This may result in conflict with the hardware callouts on our catalog drawings until all the drawings are updated.