COIL CHARACTERISTICS (Vdc) SERIES LC CODE A Vdc N Suppressed [5] Vdc Nominal operating voltage 28 28 Maximum operating voltage 29 29 Pick-up voltage, maximum - Nominal 18 18 - High temp test 20 20 - Continuous current test 22.5 22.5 Drop-out voltage, maximum 7 7 Coil resistance in Ohms ±20% at +25° C 77 77 Coil current max. @ nom. Volt.and +25° C 0.40 Amp 0.40 Amp GENERAL CHARACTERISTICS Temperature range -55°C to 71°C Minimum operating cycles (life) at rated resistive load 50,000 Minimum operating cycles (life) at 25% rated resistive load 100,000 Dielectric strength at sea level - All circuits to ground and circuit to circuit 1500 VRMS - Coil to ground and aux. contacts 1250 VRMS Dielectric strength at altitude - Main contacts 700 VRMS - Coil and auxiliary contacts 500 VRMS Insulation resistance - Initial (500 Vdc) 100 M W min - After environmental tests (500 Vdc) 50 M W min Sinusoidal vibration 10 G / 55 to 1000 Hz Shock (6 ms duration) 15 G Maximum contact opening time under vibration and shock 10 µs Operate time at nominal voltage (Including bounce) 40 ms max Release time at nominal voltage (Including bounce) 40 ms max [4] Contact bounce at nominal voltage 3 ms max Weight Noted Overload at 115/200 Vac, 400 Hz 600 Amps Rupture at 115/200 Vac, 400 Hz 800 Amps Altitude 50,000 Feet NOTES [1] Inductive load life, 20,000 cycles. [2] Ratings for double make terminal type 2, 4, & 6.  3. Alternate contact configurations and other special models available upon request. Please contact factory. [4] Greater values for suppressed coils. [5] Suppressed "N" coil has back EMF suppression to 62 Volts max.  6. This series drawing is for general use only. Please consult factory for special requirements.

Date of issue: 01/07 - 53 - Page 2 of 4