|
GENERAL CHARACTERISTICS CONTINUED
|
SERIES W
|
| Release time at nominal
voltage (Including bounce), Economizer coil |
| - DC |
25 ms max [7] |
| - AC |
100 ms max |
| Contact bounce at nominal voltage |
4 ms max |
| Weight |
4.50lbs max. |
| Overload - 115/200 Vac, 400Hz |
1800 Amperes |
| Rupture - 115/200 Vac, 400Hz |
2750 Amperes |
| Altitude |
80,000 Feet |
NUMBERING SYSTEM
W - X 0 X
Relay family_____________________________________| | | |
1-Mounting Style(A,B,Etc.)____________________________| | |
2-Terminal & Circuit (1,2,3,Etc.)_________________________| |
3-Coil Voltage(A,F,N,Y,YN)____________________________________|
|
NOTES
[1] Auxiliary contact rating - see page 5, note [2].
[2] Inductive load life, 20,000 cycles.
3. Alternate contact configurations and other special models available upon request. Please contact factory.
4. Terminal strength per para. 3.4.8.2.1 of MIL-R-6106.
[5] Back EMF suppression to 62 volts max.
[6] Economizer coils have a lower resistance primary coil for faster operate time. Once relay operates, the coil switches to a higher resistance for lower power drain. Do not ramp up voltage on these coils.
[7] Greater values for suppressed coils.
8. This series drawing is for general use only. Please consult factory for special requirements.
|
|