GENERAL CHARACTERISTICS CONTINUED
|
SERIES ZC, ZCD
|
| Contact bounce at nominal voltage |
4 ms max |
| Weight |
Noted |
| Overload |
600 Amp @ 115/200 Vac, 400 Hz |
| Rupture |
800 Amp @ 115/200 Vac, 400 Hz |
| Altitude |
50,000 Feet |
NUMBERING SYSTEM
ZC - X O X
[9]ZCD - X O X
Relay family_____________________________________| | | |
1-Mounting Style(A,B,Etc.)____________________________| | |
2-Terminal & Circuit______________________________________| |
3-Coil Voltage(A,B,C,F & N)___________________________________|
|
NOTES
[1] Inductive load life, 20,000 cycles.
[2] Ratings are for double make terminal type 2, 4 & 6.
3. Alternate contact configurations and other special models available upon request. Please contact factory.
[4] Greater values for suppressed coils.
5. Terminal strength per para. 3,4,8,2,1 of MIL-R-6106.
[6] Suppressed "N & NY" coils have back EMF suppression to 62 Volts max.
[7] Suitable for transfer between unsynchronized power sources at rating shown.
[8] Economizer coils have a lower resistance primary coil for faster operate time. Once relay operates, the coil switches to a higher resistance for lower power drain. Do not ramp up voltage on these coils.
[9] Non hermetic gasket sealed version.
10. This series drawing is for general use only. Please consult factory for special requirements.
|
|