GENERAL CHARACTERISTICS CONTINUED SERIES Z, ZD
Contact bounce at nominal voltage 4 ms max
Weight Noted
Overload 800 Amps @ 115/200 Vac, 400 Hz
Rupture 1200 Amps @ 115/200 Vac, 400 Hz
Altitude 50,000 Feet

NOTES
[1] Auxiliary contact rating - see page 5, note [2].
[2] Inductive load life, 20,000 cycles.
[3] Ratings are for double break/double make terminal type 6.
[4] Alternate contact configurations and other special models available upon request. Please contact factory.
 5. Terminal strength per para. 3,4,8,2,1 of MIL-R-6106F, Dated 8-25-67.
[6] Suppressed back EMF suppression to 62 Volts max.
[7] Suitable for transfer between unsynchronized AC power sources at rating shown.
[8] 200 Amps resistive, 25,000 cycles only, terminal style 6.
[9] Economizer coils have a lower resistance primary coil for faster operate time. Once relay operates, the coil switches to a higher resistance for lower power drain. Do not ramp up voltage on these coils.
[10] Non hermetic gasket sealed version.
11. This series drawing is for general use only. Please consult factory for special requirements.

NUMBERING SYSTEM 
                                                    Z  - X   O   X
                                                [10]ZD - X   O   X
   Relay family_____________________________________|    |   |   |
   1-Mounting Style(A,B,Etc.)____________________________|   |   |
   2-Terminal & Circuit(1,2,3 Etc.)__________________________|   |
   3-Coil Voltage(A,B,C,F,N,Y,YN) _______________________________|
Date of issue: 01/07 - 87 - Page 3 of 5