COIL CHARACTERISTICS (Vdc) SERIES Y CODE A B C M N [5] R [5] V [5] Nominal operating voltage 28 12 6 48 28 12 6 Maximum operating voltage 29 14.5 7.3 50 29 14.5 7.3 Maximum pickup voltage - Cold coil at +125° C 18 9 4.5 36 18 9 4.5 - During high temp test at +125° C 19.8 9.9 5 38 19.8 9.9 5 - During continuous current test at +125° C 22.5 11.25 5.7 42 22.5 11.25 5.7 Maximum drop-out voltage 7 4.5 2.5 14 7 4.5 2.5 Coil resistance in W ±10% at +25° C, except types "C" and "V" +20%, -10% 400 100 25 1275 400 100 25 GENERAL CHARACTERISTICS Temperature range -70°C to +125°C Minimum operating cycles (life) at rated load 100,000 Minimum operating cycles (life) at 25% rated load 400,000 Dielectric strength at sea level - All circuits to ground and circuit to circuit 1000 Vrms - Coil to ground 1000 Vrms Dielectric strength at altitude 80,000 ft 500 Vrms [6] Insulation resistance - Initial (500 Vdc) 100 M W min - After environmental tests (500 Vdc) 50 M W min Sinusoidal vibration (A and D mounting) 0.12DA / 10 to 70 Hz 30G / 70 to 3000 Hz Sinusoidal vibration (E mounting in track) 0.06DA / 10 to 57 Hz 10G /57 to 500 Hz 20G / 500 to 3000 Hz Sinusoidal vibration (G and J mounting) 0.12DA / 10 to 57 Hz 20G /57 to 3000 Hz Random vibration - Applicable specification MIL-STD-202 - Method 214 - Test condition - A and D mounting 1G (0.4G2/Hz, 50 to 2000 Hz) - Test condition - E, J and G mounting (E in track) 1E (0.2G2/Hz, 50 to 2000 Hz) - Duration 15 minutes each plane Shock (A, D and J mounting) 200G / 6 ms Shock (E mounting in track) 50G / 11 ms Shock (G and J mounting) 100G / 6 ms Maximum contact opening time under vibration and shock 10 µs Operate time at nominal voltage@25°C 6 ms max Release time at nominal voltage@25°C 6 ms max Contact make bounce at nominal voltage@25°C 0.5 ms max Contact release break bounce at nominal voltage@25°C 0.1 ms max [7] Weight maximum 0.058lb Unless otherwise noted, the specified temperature range applies to all relay characteristics.

Date of issue: 09/07 - 62 - Page 2 of 4