| Temperature range |
-70°C to +85°C |
| Minimum operating cycles (life) at rated load |
50,000 [2] |
| Minimum operating cycles (life) at 25% rated load |
200,000 |
| Dielectric strength at sea level |
| - All circuits to ground and circuit to circuit |
1000 Vrms |
| - Coil to ground |
1000 Vrms |
| Dielectric strength at altitude 80,000 ft |
500 Vrms [5] |
| Insulation resistance |
| - Initial (500 Vdc) |
100 M W min |
| - After environmental tests (500 Vdc) |
50 M W min |
| Sinusoidal vibration (A, D and J mounting) |
0.12DA / 10 to 70 Hz
30G / 70 to 3000 Hz |
| Sinusoidal vibration (E mounting in track) |
0.06DA / 10 to 57 Hz
10G /57 to 500 Hz
20G / 500 to 3000 Hz
|
| Sinusoidal vibration (G mounting) |
0.12DA / 10 to 57 Hz
20G /57 to 3000 Hz |
| Random vibration |
| - Applicable specification |
MIL-STD-202 |
| - Method |
214 |
| - Test condition - A, D and J
mounting |
1G (0.4G2/Hz, 50 to 2000
Hz) |
| - Test condition - E and G mounting (E
in track) |
1E (0.2G2/Hz, 50 to 2000
Hz) |
| - Duration |
15 minutes each plane |
| Shock (A, D and J mounting) |
200G / 6 ms |
| Shock (E mounting in track) |
50G / 11 ms |
| Shock (G mounting) |
100G / 6 ms |
| Maximum contact opening time under
vibration and shock |
10 µs |
| Operate time at nominal voltage@25°C |
12 ms max |
| Release time at nominal voltage@25°C |
20 ms max |
| Contact make bounce at nominal voltage@25°C |
1 ms max |
| Contact release break bounce at nominal voltage@25°C |
0.1 ms max |
| Weight maximum |
0.034lb |