ENGINEERING DATA SHEET F250 RELAY - NONLATCH 2 PDT, 2 AMP APPLICATION NOTES: 001 007 APPLICABLE SOCKET: HRCW SO9005 SF250R4 Non polarized, non latching hermetically sealed relay Contact arrangement 2 PDT Coil supply Direct current Designed to the performance standards of MIL-PRF-39016/6 Qualified to CECC16101-014 BS CECC16101-021 Contact types per CECC1610-021 Contacts with reduced service life for resistive loads (contact types I, II, III) -- Code 01; contacts with reduced service life at low level resistive loads -- Code 02 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 2 Amps / 28 Vdc Weight less than 11 grams Dimensions of case 20.6mm x 10.4mm x 10.5mm Hermetically sealed, corrosion protected metal can. CONTACT ELECTRICAL CHARACTERISTICS Minimum operating cycles Contact rating per pole and load type Load Current in Amps @28Vdc @115Vac/60-400Hz 100,000 cycles 100,000 cycles 100,000 cycles resistive load inductive load (L/R=5ms) lamp load 2 0.75 - 0.3 - - 100 cycles resistive overload 4 - 400,000 cycles at 25% rated load

www.leachintl.com North America 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 USA Tel: (01) 714-736-7599 Fax: (01) 714-670-1145 Europe, SA 2 Rue Goethe 57430 Sarralbe France Tel: (33) 3 87 97 98 97 Fax: (33) 3 87 97 84 04 Asia-Pacific Ltd. 20/F Shing Hing Commercial Bldg. 21-27 Wing Kut Street Central, Hong Kong Tel: (852) 2 191 2886 Fax: (852) 2 389 5803 Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component. Date of issue: 01/07 - 29 - Page 1 of 4